Liquid Gel Bottle Gel № 25

Application method:

STRENGTHENING:

1. Withdrawal.
2. We do not file the nail shape or leave it 2 mm long, which we will remove after leveling.
3. Use a 220-grit file to file the nail without applying strong pressure from above, lifting the scales of the nail plate, or use a 100-grit buff.
4. Let’s do a manicure.
5. If we work with removers, we wash our hands with soap after working with them.
6. Degrease the nail with Nail Prep. Do two approaches. Use 4 wipes for this (1 wipe for 5 fingers). First approach: wipe the surface of the nail. Second approach: take an orange stick, put a wipe on it and wipe everything in the cuticle area and in the sinuses.
7. We use a primer if desired, but if the base for the substrate has sufficient acidity, then it is not needed.
8. The Rubber Base is best applied with a flat gel brush. The movements should be rubbing. We draw all the sinuses of the nail and dry in the lamp for 60 seconds.
9. We erase the stickiness.
10. Level it. If leveling with gel, leave 0.5–1 mm of space from the cuticle. Dry in the lamp for 60 seconds.
11. File the shape after it has been smoothed out. This is necessary so that a thickness forms on the edge of the nail that will hold the free edge.
12. If the nail was thin, it may curl, so be sure to cut 1 mm of the natural nail from the inside. In this case, there will be no peeling of the material. If the material is hard and the nail is very soft, the nail itself will begin to separate from the hard material from the free edge.
13. After filing, we erase the stickiness and cover with gel polish.
14. Cover with top coat. Dry for 120 seconds. After drying, do not wipe with anything, as the shine may be lost.

CLASSIC EXTENSION:

1. Withdrawal
2. We shorten the length of the nail to 1 mm and make a round shape.
3. Use a 220-grit file to file the nail without applying strong pressure from above, lifting the scales of the nail plate, or use a 100-grit buff.
4. Let’s do a manicure.
5. If we work with removers, we wash our hands with soap after working with them.
6. Degrease the nail with Nail Prep. Do two approaches. Use 4 wipes for this (1 wipe for 5 fingers). First approach: wipe the surface of the nail. Second approach: take an orange stick, put a wipe on it and wipe everything in the cuticle area and in the sinuses.
7. We use primer.
8. The Rubber Base is best applied with a flat gel brush. The movements should be rubbing. We draw all the sinuses of the nail and dry in the lamp for 60 seconds.
9. We erase the stickiness.
10. We set the form for building the free edge of the nail.
11. Apply the clear gel to the shape of the artificial nail. Dry for 30 seconds.
12. File the free edge and give the nail the desired shape.
13. Wipe away the stickiness and excess dust.
14. We go over the areas where the saw was used with Rubber Base again. Let it dry for 30 seconds.
15. Level it with gel, place it in the lamp and clamp it for 10–15 seconds. If the gel is very sticky or contains glitter, clamp it for 20 seconds.
16. Dry in the lamp for 120 seconds.
17. We erase the stickiness before applying gel polish.
18. Cover with top coat. Dry for 120 seconds. After drying, do not wipe with anything, as the shine may be lost.

INGREDIENTS: Acrylates Copolymer, Hydroxypropyl Methacrylate, Hydroxycyclohexyl Phenyl Ketone, Silica, Ethyl Trimethylbenzoyl Phenylphosphinate.

MAY CONTAIN: CI 45380, CI 15850, CI 77491, CI 15985, CI 77492, CI 77007, CI 77510, CI 77742, CI 77289, CI 77499, CI 77891, CI 77000, Mica.